Yealink SIP-T56A
Smart Media Phone
Quick Reference User Guide
Page 4 | Copyright © Telair Pty Ltd (ABN 92 119 713 745) | www.telair.com.au | 1800 telair (835 247) Copyright © Telair Pty Ltd (ABN 92 119 713 745) | www.telair.com.au | 1800 telair (835 247)
REDIAL A NUMBER
To call the last dialled number:
• Press twice when the phone is idle to dial the last dialled number.
To call a previously dialled number:
1. Press to enter the Placed Calls list.
2. Tap the desired entry in the list to redial the number.
MUTE OR UNMUTE A CALL
• Press to mute a call, or un-mute an active call.
FORWARD A CALL
1. Swipe down from the top of the screen to enter the control centre.
2. Tap Settings soft key.
3. Select Features and then Call Forward.
4. Select the desired forward type: Always Forward, Busy Forward, or No Answer Forward.
5. Enter the destination number you wish to forward calls to.
• For No Answer Forward, tap the After Ring Time field and tap the desired ring time to wait
before forwarding.
• Tap to accept the change.
CREATE A CONFERENCE CALL
1. Tap the Conference soft key during an active call to place the call on hold.
2. Enter the extension or external number of the second party, then tap Conference or .
3. Tap the Conference soft key again when the second party has answered the call.
• All parties are now joined in the conference call.
PLACE A CALL ON HOLD & THEN RESUME THE CALL
To place a call on hold:
• Press or tap the Hold soft key during an active call.
To resume a call from hold:
• Press or tap the Resume soft key when a call is on hold.
If there is more than 1 call on hold:
• Tap the desired held call you want to resume, then press or tap the Resume soft key to
retrieve the desired call.
How to (cont...):
To Next Page
Need help?
General
