Yealink T19P

Yealink IP Phones Auto provisioning Guide
72
Parameter
Permitted
Values
Descriptions
Web Setting Path
The default value is 0.
It takes effect after a reboot.
network.vlan.
dhcp_enable
=
0 or 1
It enables or disables the phone to
obtain VLAN by DHCP.
0-Disabled
1-Enabled
The default value is 1.
It takes effect after a reboot.
Network->
Advanced->VLAN
>DHCP VLAN->
Active
network.vlan.
dhcp_option
=
Integer from
128 to 254
It configures the DHCP option from
which the phone will obtain the VLAN
settings. You can configure at most five
DHCP options and separate them by
commas.
The default value is 132.
It takes effect after a reboot.
Network->
Advanced->VLAN
>DHCP VLAN->
Option
network.dhcp
_host_name =
String within
99
characters
It configures the client host name for
DHCP option 12.
For SIP-T28P IP phones:
The default value is SIP-T28P.
For SIP-T26P IP phones:
The default value is SIP-T26P.
For SIP-T22P IP phones:
The default value is SIP-T22P.
For SIP-T21P IP phones:
The default value is SIP-T21P.
For SIP-T20P IP phones:
The default value is SIP-T20P.
For SIP-T19P IP phones:
The default value is SIP-T19P.
For SIP-T48G IP phones:
The default value is SIP-T48G.
For SIP-T46G IP phones:
The default value is SIP-T46G.
For SIP-T42G IP phones:
The default value is SIP-T42G.
Features->General
Information->
DHCP Hostname