Yealink T20P

Enterprise IP Phone Using the Basic Phone Functions
- 23 -
Hot Line
To set the hot line number via the IP phone interface:
1) Press MENU->Features->Hot Line->OK to enter the configuration page.
2) Enter the hot line number and set the HotLine Delay (for example, 20 seconds),
then press the OK button to save the changes.
3) When you pick up the handset or press the speaker button, and it will dial out the
number automatically if you do not press any keys for 20 seconds.
To set the Hot Line via the Web interface:
1) Choose Phone->Features.
2) Input the Hotline Number and Hotline Delay, and then click the Confirm button to
save the change.