Yealink T3 Series User Manual

Maintaining Your Phone
84
The phone begins resetting.
Tip: You can also long press the OK key when the phone is idle.
After reset, the screen prompts “Welcome Initializing…Please wait”.
The phone will be reset successfully after startup.
Note: Reset of your phone may take a few minutes. Do not power off until the phone has started up successfully.
Updating the Phone Configuration
Your system administrator may ask you to update the configuration for your phone to apply any changes to system
settings, which you can do without restarting it.
Procedure
1. Go to Menu > Settings > Basic Settings > Update Configuration.
On the T33P/T33G phones, go to Menu > Basic > Update Configuration.
A message is displayed on the phone screen:
2. Select OK.
Tip: You can also long press the REDIAL key when the phone is idle to update the phone configuration.
Clearing User's Personalized Configuration Settings
You can clear the personalized configuration settings manually on the phone.
Before You Begin
Your system administrator has enabled the phone to keep the user's personalized settings after auto provisioning.
Procedure
1. Go to Menu > Settings > Basic Settings > Reset local settings.
On the T33P/T33G phones, go to Menu > Basic > Reset local settings.
The phone prompts you to reset the local settings or not.
2. Select OK.

Yealink T3 Series Specifications

General

Brand	Yealink
Model	T3 Series
Category	IP Phone
Language	English