CCSi Communications
365 Surryse Rd, Ste 220, Lake Zurich, IL, 60047 | Tel: 630-241-0600 | Fax: 630-241-1071| tservices@ccsicomm.com
www.ccsicomm.com
Notes Programming Buttons
When programming local extension buttons - select ‘BLF’ (Busy Lamp Field) as the key type. Enter the
extension number in the Key Value and the extension name in the key Label. This will light the key
providing an indication if the person’s on a call (red) or not (green).
When programming a forward to voicemail button – select DND (Do Not Disturb) as the key type and
enter FWDVM in the key Label.
When programming a forward to cell phone button – select forward as the key type and enter FWDCELL
in the key Label. Also, click in the Features TAB and enter your cell phone number in the Target field (The
account field must show your extension number and then program the “On Code” and “Off Code” as the
below picture is showing).
To upload a unique ring tone, select the Settings Tab and either select one of the available ring types, or upload a
‘.wav’ file off your PC, Choose File, then Upload and Confirm. Also, you can change the Wallpaper picture (T46G).
To Next Page
Loading...
