IP PHONE T42G
Quick Startup Guide
Packaging Contents
The following contents are included in your T42G package:
3. Connect the network and power, as shown below.
Assembling the Phone
1. Attach the stand, as shown below.
2. Connect the handset and optional headset, as shown below.
Note: Headsets are to be purchased separately.
Note: You have two Power Options – AC or PoE. If
PoE is provided, you do not need to connect the
Power Adapter.
Startup the Phone
After the IP Phone is connected to the network and supplied with
power, it automatically begins the initialisation process. After
startup, the phone is ready to use (pre-configured).
To Next Page
