Do you have a question about the Yealink T42G and is the answer not in the manual?
Power requirements | 100-240V, DC 5V |
---|---|
Power over Ethernet (PoE) | Yes |
Touchscreen | - |
Display diagonal | 2.7 \ |
Display resolution | 192 x 64 pixels |
Lines quantity | - lines |
Phonebook capacity | 1000 entries |
Number of VoIP accounts | 3 |
Voice codecs | G.711, G.723, G.729A, G.729B |
Bluetooth | No |
RJ-9 ports quantity | 2 |
Ethernet LAN (RJ-45) ports | 1 |
Storage temperature (T-T) | -10 - 50 °C |
Operating relative humidity (H-H) | 10 - 95 % |
Mounting | Desk/Wall |
Handset type | Wired handset |
Product type | IP Phone |
Product color | Black, Grey |
Number of handles included | 1 pc(s) |
Depth | 175 mm |
---|---|
Width | 212 mm |
Height | 189 mm |
Details the main hardware components of the BizPhone Standard T42G IP Phone, including the LCD and keypad.
Details how to adjust the ringer volume when idle and receiver volume during calls.
Describes how to view the phone's directory, including local and remote phone books.
Focuses on managing contacts within the local directory, including adding groups.
Guides on how to place calls using the handset, speakerphone, or headset.
Methods for answering calls when the phone is idle, using handset, speaker, or headset.
How to answer an incoming call while already on another call, placing the first on hold.
Steps to place an active call on hold and retrieve it.
Instructions on how to enable the Do Not Disturb feature to reject incoming calls.
Explains types of static call forwarding (Always, Busy, No Answer).
Step-by-step guide to configure static call forwarding settings.
Steps to transfer a call directly to another party without consultation.
How to transfer a call when the target phone is ringing.
Steps to transfer a call after consulting with the recipient.
How to enable or disable the call waiting feature and tone.
Instructions on how to initiate and manage a three-way conference call.