You can enable or disable a call waiting on the phone. If the call waiting is enabled, you can receive
another call while there is already an active call on the phone. Otherwise, another incoming call is
automatically rejected by the phone with a busy message when there is an active call on the
phone. You can also enable or disable the phone to play a warning tone when receiving another
call.
To configure call waiting on your phone:
1. Press Menu → Features → Call Waiting.
2. Press or , or the Switch soft key to select Enabled from the Call Waiting field.
3. Press or , or the Switch soft key to select Enabled from the Play Tone field.
4. (Optional) Enter the call waiting on code or off code respectively in the On Code or Off
Code field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Note: Call Waiting is local to the phone, and may be overridden by the admin settings. For more
information, contact your system administrator.
To Next Page
Loading...
