EasyManuals Logo

Yealink T42G Quick Start-Up

Yealink T42G
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
minder Virtual PABX: Your Quick Startup
What is included in your T42G/S Package:
IP PHONE T42G/S
www.mindercloud.com.au
How to assemble your IP PHONE T42G/S:
1. Attached the stand, as shown below.
2. Connect your handset and optional
headset, as shown below.
NOTE: Headsets are purchased seperately.
3. Connect your network and power, as
shown below.
To Startup your IP PHONE T42G/S:
After the IP Phone is connected to the network and supplied
with power, it automatically begins the initialisation process.
After Startup, your IP Phone is ready to use (pre-configured).
NOTE: You have 2 Power Options - AC and PoE.
If PoE is provided, you do not need to connect the
Power Adapter.

Other manuals for Yealink T42G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink T42G and is the answer not in the manual?

Yealink T42G Specifications

General IconGeneral
Power requirements100-240V, DC 5V
Power over Ethernet (PoE)Yes
Touchscreen-
Display diagonal2.7 \
Display resolution192 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Voice codecsG.711, G.723, G.729A, G.729B
BluetoothNo
RJ-9 ports quantity2
Ethernet LAN (RJ-45) ports1
Storage temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Grey
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height189 mm

Related product manuals