Yealink T42G

You can configure your phone to forward incoming calls to another party through static forwarding.
You can also forward incoming calls while your phone is ringing (dynamic forwarding).
Static Forwarding
There are 3 types of Static Forwarding:
 Always Forward: Incoming calls are immediately forwarded.
 Busy Forward: Incoming calls are immediately forward if the phone is busy.
 No Answer Forward: Incoming calls are forwarded if not answered after a period of time.
To enable Call Forward on your phone:
1. Press Menu → Features → Call Forward.
2. Press or to select the desired forwarding type.
3. Press the Enter soft key.
4. Depending on your selection:
a. If you select Always Forward:
i. Press or , or the Switch soft key to select Enabled from the Always
Forward field.
ii. Enter the destination number you want to forward all incoming calls to in
the Forward to field.
iii. (Optional) Enter the always forward on or off code respectively in the On
Code or Off Code field.
b. If you select Busy Forward:
i. Press or , or the Switch soft key to select Enabled from the Busy
Forward field.
ii. Enter the destination number you want to forward all incoming calls to
when the phone is busy in the Forward to field.
iii. (Optional) Enter the busy forward on or off code respectively in the On
Code or Off Code field.