Yealink T42G User Manual

Time and Date
The time and date are displayed on the LCD screen when the phone is idle. You can configure the
time manually via the phone interface.
To configure the time and date manually on your phone:
1. Press Menu -> Settings -> Basic Settings -> Time & Date -> Manual Settings.
2. Enter the specific time and date.
3. Press the Save soft key to accept the change. The time and date displayed on the
LCD screen will change accordingly.
To configure the time and date format on your phone:
1. Press Menu -> Settings -> Basic Settings -> Time & Date -> Time & Date Format.
2. Press or , or the Switch soft key to select the desired time format (12 Hour
or 24 Hour) from the Time Format field
3. Press or , or the Switch soft key to select the desired date format from the
Date Format field.
4. Press the Save soft key to accept the change or Back to cancel.
There are 7 available date formats:

Yealink T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm