Yealink T42G User Manual

Received Calls
Place Calls
LED Instructions
Power Indicator LED
Solid Red
The phone is initialising
Fast Flashing Red
The phone is ringing
Slow Flashing Red
The phone has received a voicemail
Off
The phone is powered off or idle
Line Key LED
Solid Green
The line is seized
The line is in conversation
Fast Flashing Green
The line is receiving an incoming call
Slow Flashing Green
The call is placed on hold
Off
The line is inactive
Line Key LED (configured as BLF key)
Solid Green
The monitored user is idle
Fast Flashing Green (200ms)
The monitored user is receiving an incoming call
Slow Flashing Green (500ms)
The monitored user is dialing
The monitored user is talking
The monitored user’s conversation is placed on hold
Slow Flashing Green (1s)
The call is parked against the monitored user’s phone
number
Off
The monitored user does not exist

Yealink T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm