EasyManua.ls Logo

Yealink T42G

Yealink T42G
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You can transfer a call to another party in one of three ways:
Blind Transfer: Transfer a call directly to another party without consulting.
Semi-Attended Transfer: Transfer a call when the target phone is ringing.
Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1. Press the Transfer soft key during a call.
2. Enter the number you want to transfer the call to.
3. Press the Transfer soft key to complete the transfer. Then the call is connected to the
number to which you are transferring.
To perform a semi-attended transfer:
1. Press the Transfer soft key during a call.
2. Do one of the following:
a. Enter the number you want to transfer the call to.
b. Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact.
c. Press the Directory soft key, and then select History. Select the desired list and
then press or to select the entry.
3. Press to dial out.
4. Press the Transfer soft key to complete transfer when receiving ring back.
To perform an attended transfer.
1. Press the Transfer soft key during a call.
2. Do one of the following:
a. Enter the number you want to transfer the call to.
b. Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact.
c. Press the Directory soft key, and then select History. Select the desired list and
then press or to select the entry.
3. Press to dial out.
4. After the party answers the call, press the Transfer soft key to complete the transfer. If you
are using a handset, the transfer can be completed by hanging up the handset. You can
cancel the transfer before the call is connected by pressing the Cancel soft key.
To perform an attended transfer using the Busy Lamp Field (BLF) buttons:
1. Press the Transfer soft key during a call.
2. Press the button on the handset.
3. Press the BLF button for the party you wish to transfer the call to.
After the party answers the call, press the Transfer soft key to complete the transfer.

Other manuals for Yealink T42G

Related product manuals