Yealink T46 - Call Transfer Procedures; Power Indicator LED Status; Transferring a Call; Handling Unaccepted Transfers

Yealink T46 User Guide
Yealink SIP-T46G User Guide – Applies for firmware version 71 and The HIVE version 2.9 December 2013
Transfer
 Press the Transfer button or the Transfer soft key during an active call.
 Enter the number you want to transfer the call to.
 Press the Transfer button or the Transfer soft key.
Transfer to Voicemail
 Press the Transfer button or the Transfer soft key during an active call.
 Enter “*” then the extension number. For example to transfer a call to extension’s
101’s voicemail you would enter *101.
 Press the Transfer button or the Transfer soft key.
Conference Calling
 To begin a Conference Call
o Press the Conference soft key during an active call.
o Enter the number of the second party and press the Send key.
o Press the Conference soft key again when the second party answers. All parties
are now joined in the conference.
 To mute one participant of a Conference Call
o Press the Manage soft key
o Use the up and down arrow keys to select the desired participant.
o Press the Far Mute soft key
 To un-mute one participant of a Conference Call
o Press the Manage soft key
o Use the up and down arrow keys to select the desired participant.
o Press the UnMute soft key
 To remove one participant from a Conference Call
o Press the Manage soft key
o Use the up and down arrow keys to select the desired participant.
Please note that calls can be transferred to internal extension or external numbers (e.g.
cell phones).