Yealink T46S Handling Instruction

Mixvoip
https://www.mixvoip.com/contact
mixvoip.com/contact
If the phone of a colleague is ringing, and you want to intercept the call, press key «DPickup» or enter
the number of the ringing extension.
Press on action key "forward" then twice on "enter" . Navigate with the right arrow on the
directional pad, select "enable" and input the destination number on the second line "forward to"
(internal or external number), then save with the key "save"
To disable the call forward, follow the same path but choose the "disable" option.
To place a call on hold, press the key "hold". To resume the call, press "hold" again.
When a first call in on hold, you can initiate a second call with the key "new call".
When you take a second line, the first conversation is automatically placed on hold.
Press on "swap" to allow you to switch from one conversation to another one.
Call Conference
Enable a call forward
Placing a call
Enter the number, and press in the center of the direction pad.
Handling your Yealink T46S
Desktop Phones
Call interception (if activated)
Transfer a call
Blind Transfer
- Press on action key "transfer" . The call is on hold.
- Enter the destination extension number, then hang up.
Attended Transfer
- Press on action key "transfer" . The call is on hold.
- Enter the destination extension number, then press on
- Press again on to transfer the call.
- If the person doesn’t whish to take the call, press on then "hold" to take it back.
- If you receive a second call while the first one is on hold, you can select the call to transfer with the
directional pad and instructions on the screen.
Place a call on hold
During a active call you can welcome a third person into the conversation. Press "conf" then enter the
number (internal or external), then press again on "conf" . All parties are joined in the conference.
Call log
Press on "redial" to access the call history and missed calls, or "message" to access voice messages.
Use the directional pad to choose between the different options.
Change the ring tone
Access the menu by pressing . Then "setting", "basic", "sound" and "ring tone", then "save" to validate
your choice.
6 : Speakerphone key
1
1
1
1
1
3
4
4
3
2
3
3
202104 Yealink T46S User guide

Yealink T46S Specifications

General

Manual	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	CNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Number of programmable keys	10
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm
Package depth	255 mm
Package width	274 mm
Package height	128 mm