Yealink T48

hellospoke.com 888 / 955 / 5155 Yealink T48
Voicemail
Setting up a new voicemail
1. Press the Message button on the phone (to the right of the navigation keys).
2. When prompted, dial your mailbox (extension) number – followed by #.
3. Follow voice prompts to setup voicemail features.
Editing voicemail settings
1. Press the Message button on the phone.
2. When prompted, dial your mailbox (extension) number – followed by #.
3. At voice prompt, press 5 (change settings).
• Press 1 to record personal greeting
• Press 2 to record name
• Press 3 to change password
Using a temporary greeting (out-of-office greeting)
1. Press the Message button on the phone.
2. When prompted, dial your mailbox (extension) number – followed by #.
3. At voice prompt, choose 5 (change settings).
• Press 4 to record a temporary greeting
• Press 5 to restore permanent greeting
Accessing voicemail system remotely
1. From an outside phone (not a hellospoke phone), call your DID (or dial your main number and access
your extension through your auto-attendant).
2. When you hear your personal voicemail greeting, press *.
3. When prompted for you password, enter it followed by #.
4. At this point, you will have access to your personal voicemail features. This will allow you to retrieve
messages and access all voicemail features.
T48G
HEADSET
MESSAGE
REDIAL
HOLD
TRANSFER
MUTE
1
2 3
4
5 6
7
*
8
0
9
#
ABC DEF
JKLGHI MNO
TUVPQRS
.
WXYZ
SEND
X
OK
–
+
NOTE: In addition to receiving your voicemail messages on your phone and using the procedures listed above to retrieve them, you will also receive your
voicemail via an email with a recording of the voicemail attached as a .wav le. In order to delete the voicemail from the system, you must use your phone
(or remote access). Deleting the email with the attached voicemail recording will not delete the voicemail from the system.