Yealink T48G Complete Overview

Yealink T48G Guide: A Complete Overview For Nemsys Conversation Clients
Nemsys LLC : 122 S. St Clair, Toledo, Ohio 43604 : 419-243-3603 : www.nemsys.com
5
Idle Phone
In Call
Configuring Settings
Call on Hold
The idle screen is were the phone
rests at when not receiving or on
a call. From here, you can view
your call history, contact
directory, place phone on Do Not
Disburt and access settings.
The In-Call screen shows the
ability to Transfer the call, place
the call on Hold, begin a
Conference Call or End the Call.
When you see the 123 soft key,
you can press the key to change
it to alpha entry, alpha/numerical
entry, etc.
Settings
When a call is On Hold, you can
place a new call, end the call (hang
up the on hold line), Transfer the on
hold call to a new extension or
Resume the call

Yealink T48G Specifications

General

Wi-Fi	No
Display	7" 800 x 480-pixel color touch screen
Network	Dual-port Gigabit Ethernet
PoE	Yes (IEEE 802.3af)
Audio Features	HD voice: HD handset, HD speaker
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Network Features	SIP v1 (RFC2543), v2 (RFC3261)
Bluetooth	Bluetooth via USB Dongle
USB	1 x USB 2.0
Headset	Yes (EHS support)
Expansion Module	Supports up to 6 modules
Local Phonebook	1000 entries
Power Supply	AC 100~240V input, DC 5V/2A output
Supported Languages	English, French, German, Italian, Polish, Portuguese, Russian, Spanish
Operating Temperature	0 ~ 40°C (+32 ~ 104°F)
Humidity	10% to 95%, non-condensing
Dimensions	266 x 226 x 185 mm