Handset Name
1. Press the OK key to enter the main menu, and then select Settings->
Handset Name
.
3. Press the Save soft key to accept the change.
Silent Mode
Press or when the handset is idle or ringing to adjust the ringer volume.
Volume Adjustment
Press or during a call to adjust the receiver volume of the
speakerphone/earpiece/earphone.
Long press when the handset is idle to switch the silent mode to On.
Long press again to switch the silent mode to Off.
To rename the handset:
2. Edit the value in the Rename field.
Handset Settings
Locking/Unlocking Keypad
Long press when the handset is idle to lock the keypad.
Long press again to unlock the keypad.
Press one or more times to switch between different input modes or enter “#”.
Press to select the special characters or enter “*”.
Press a digit key one or more times to enter the desired character or digit.
Press the Del soft key to delete entered characters.
Press the Save soft key to accept the change or to cancel.
Entering and Editing Data
To turn the handset on, do one of the following:
Place the handset in the charger cradle. The handset will turn on automatically.
To turn the handset off:
Press , then the LCD screen lights up.
Long press to turn the handset off.
Turning Handset On/Off
Basic Operations
Press to access the call history.
Press to check the line status.
Press to place an internal call.
Press to decrease the ringer volume.
Press to provision/re-provision IP Voice service.
Press to increase the ringer volume.
Shortcuts
This helps you get quick access to features by pressing the shortcut keys directly
without scrolling through the menu. You can press the following predefined shortcuts
to access some frequently used features when the handset is idle:
Ring Tones
4. Press the Save soft key to accept the change.
Local Directory
To add a contact:
1. Press the OK key to enter the main menu, and then select Directory.
3. Enter the desired value in the Name, Number and Mobile field respectively.
2. Press the Options soft key, and then select New Contact.
4. Press the Save soft key to accept the change.
3. Press or to select the desired ring tone.
2. Press or to highlight the Intercom Call option or the desired line.
1. Press the OK key to enter the main menu, and then select Settings->
Audio->Ring Tones->Melodies.
• The provisioning process disables the phone’s administration account. If
you require access to the phone’s management interface, please contact
support.
• If the activation was unsuccessful, check your network settings and move
back to step 1, Provision IP Voice Service, and try again.
• If the problem persists, contact device support if any error appears
during the provisioning process.
Note:
5 6
To Previous Page
Loading...
Need help?
General
