2
Note:
• We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party
accessories may result in reduced performance.
• Use the Yealink original PoE adapter (54V/0.56A) to charge the endpoint only. The use of the third-party PoE
adapter may cause the damage to the endpoint.
• Put the magnet rings on the HDMI cable to prevent electromagnetic interference.
Package Contents
VC210 VCR20-MS 3m 1.8m Cable Tie×5
Remote Control AAA Battery×2 Ethernet Cable HDMI Cable
(for the display device)
1/4”-20 UNC Camera Lens CP900 Room Package Quick Start
Screw Privacy Cover (Optional) PoE Adapter Guide
PSE
2m Ethernet Cable
(CAT5E FTP cable)
Power Cord
Endpoint Installation
Select one of the following installation method:
• Put on a Flat Surface
You can put the endpoint on a conference room table.
• Mount on top of a TV
You can mount endpoint on top of the TV when the thickness of the TV is between
1mm and 36mm.
Note:
• The base of the camera must be parallel to the top of TV.
• You can adjust the angle of the camera manually. The angle can be up to 30 degree.
• Choose other installation method if the thickness of the TV is more than 36 mm.
CP900
5m EXT
USB Cable
To Next Page
Loading...
