Yealink VC400 - Configure Port Mapping

PortFunction
H.323 signal port
SIP（ optional ）
Audio & Video media stream port
Web management port（ optional ）
Protocol Type
UDP/TCP
5060
443
50000-50499
1719-1720
TCP/UDP
TCP/UDP
TCP
Configure Port Mapping
If the VC400 is deployed in an Intranet, you need to finish the following port mapping on the firewall:
8
.
Press 【Save】 to save the configuration, then the screen prompts【Reboot now】
. Press 【OK】
to reboot the system.
8