Yealink VCM34 - User Manual

Other manuals for Yealink VCM34

Questions and Answers:

N
nwilliamsonSep 8, 2025
Why does the far site see a black screen when I share content on my Yealink VCM34 Conference System?
- W
  wnelsonSep 9, 2025
  If the far site displays a black screen when you share content on your Yealink Conference System, configure the network address adapter to send content to the actual public IP address. You can do this in the web user interface under Setting > Call Features > Outbound Call Settings. Select the desired value from the drop-down menu of Network Address Adapter: Disabled, IP Adapter, Port Adapter, or IP & Port Adapter.
M
Mr. Thomas FlynnSep 7, 2025
Why can't I adjust the camera on my Yealink VCM34?
- A
  angelacrosbySep 8, 2025
  If you cannot adjust the camera angle and focus on your Yealink Conference System, select the local image using your remote control before attempting to adjust the camera. Ensure the system is idle or during a call, and check the remote control.
L
Leslie HernandezAug 22, 2025
What to do if I forget the admin password for my Yealink VCM34?
- S
  sarahsanchezAug 22, 2025
  To regain access to advanced settings on your Yealink Conference System after forgetting the administrator password, reset your system.
G
Gabriela WalshSep 5, 2025
Why can't I hear the ring tone on my Yealink VCM34?
- T
  Tammy PachecoSep 5, 2025
  If you cannot hear the ring tone when receiving a call on your Yealink Conference System, adjust the volume.
V
vstricklandSep 3, 2025
Why is the video quality poor on my Yealink VCM34 Conference System?
- J
  Jerome StewartSep 4, 2025
  If the video quality is poor on your Yealink Conference System, adjust the monitor resolution and camera parameters like brightness and white balance. Check call statistics for packet loss and contact your network administrator if necessary. Avoid high-intensity indoor light or direct sunlight on the camera.
A
Amanda MooreSep 2, 2025
Why can't I share content on my Yealink VCM34?
- M
  Mr. Albert OlsonSep 2, 2025
  If you cannot share content from your Yealink Conference System, ensure your PC is properly connected and turned on. If you're using a VCH50/VCH51 video conferencing hub or WPP20 wireless presentation pod, try replacing it. If using a WPP20, ensure it's connected to the video conferencing system to obtain the Wi-Fi profile and that the wireless AP feature of the video conferencing system is enabled.
A
Alec CruzSep 1, 2025
How to prevent monitor burn-in on Yealink Conference System?
- X
  xallenSep 1, 2025
  To prevent monitor burn-in on your Yealink Conference System, configure the automatic sleep time or use a screen saver. Additionally, decrease the monitor's sharpness, brightness, and contrast settings if they are set to their maximum values.
B
Brian WeberAug 31, 2025
What to do if the picture is blank on my Yealink VCM34 monitor?
- C
  Christopher RogersAug 31, 2025
  If the picture is blank on the monitor connected to your Yealink Conference System, press any key on the remote control to wake the system if it's in sleep mode. Ensure the system is powered on and that the HDMI cable is securely connected to both the system and the monitor, and that the monitor is also powered on.
J
Jeffrey McphersonAug 30, 2025
How to fix Yealink VCM34 remote control not working?
- S
  Stacey WillisAug 30, 2025
  If your Yealink Conference System does not respond to the remote control, replace the batteries, ensure they are correctly installed, and aim the remote control directly at the sensor when performing tasks.
J
Jonathan PattersonAug 28, 2025
Why can't I receive calls on my Yealink VCM34 Conference System?
- B
  brownmaryAug 28, 2025
  If you cannot receive calls on your Yealink Conference System, ensure your network is available or contact your network administrator. Also, verify that your account is registered and that Do Not Disturb (DND) mode is disabled.

Yealink VCM34 Specifications

General

Product type	Microphone
Product color	Black, Grey
LED indicators	Yes
Package depth	196 mm
Package width	310 mm
Package height	80 mm
Package weight	4260 g
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	2
Power source type	PoE
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 90 %
Quantity	1
Cables included	LAN (RJ-45)