EasyManua.ls Logo

Yealink VCM36-W - Battery LED Indicator; Upgrading the VCM36-W

Yealink VCM36-W
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• Battery LED indicator:
Charging.
Solid red
Slowly flashing red
Solid green for 3
seconds and then off
Fast flashing red 3
times and then off
The battery capacity is too low to power
on the VCM36-W.
The battery capacity is less than 20%.
The VCM36-W is standby.
Solid green
LED Status
Description
Fully charged.
The VCM36-W is powered on.
Solid green for one
second and then off
The VCM36-W is in standby mode.
The VCM36-W is powered off.
Off
4
Upgrading the VCM36-W
If the video conferencing system or UVC camera has a built-in wireless
microphone firmware after pairing with VCM36-W successfully, the VCM36-W
will be upgraded automatically.
Note: Make sure the VCM36-W has enough power before upgrading.
E
N
G
L
I
S
H
Note: When the VCM36-W is not used for a while, it will enter standby
mode. You can wake up the VCM36-W by tapping the Mute button or
placing it in the charging cradle. After wake-up, the VCM36-W will
return to the state before standby.

Other manuals for Yealink VCM36-W

Related product manuals