Yealink W52P How To Configure

2/28/2019 Provisioning a Yealink DECT W52P/W56P with the 3CX v15
https://www.3cx.com/sip-phones/yealink-dect-w52p/ 1/4
How to configure Yealink W52P/H, W56P/H, W60P/B
for 3CX
This guide applies to v15 SP4 and higher.
On this topic
How to configure Yealink W52P/H, W56P/H, W60P/B for 3CX
Supported Models: Yealink DECT series and Handsets
Base Station
Handset Station
Step 1: Upgrade to the Required firmware
Step 2: Factory Reset the Yealink Dect system
Step 3: Provisioning a Yealink WP station
Remote STUN
SBC
Step 4: Registering the handset
Known Limitations
Supported Models: Yealink DECT series and Handsets
Base Station
● Yealink W52P
● Yealink W56P
● Yealink W60P/B
Handset Station
● Yealink W52H
● Yealink W53H

Yealink W52P Specifications

General

Caller ID	Yes
Lines quantity	- lines
Answering machine	No
Phonebook capacity	500 entries
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
Maximum indoor range	50 m
Maximum outdoor range	300 m
Voice codecs	G.711, G.723, G.726, iLBC
Number of melodies	9
Display diagonal	1.8 \
Display resolution	128 x 160 pixels
Headset connectivity	2.5 mm
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Standby time	100 h
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	108 mm
Width	153 mm
Height	45 mm
Height (max)	50 mm
Height (min)	144 mm