Yealink W52P - Regulatory Compliance Information; Part 15 FCC Rules; Industry Canada (IC) Compliance; Class B Digital Device Compliance

Fort Andross Mill – 14 Maine St. Suite 200 Brunswick, ME 04011
800-881-0825 | www.covecentral.com | info@covecentral.com
Set Profile Status
1. Dial your voicemail.
2. Enter PIN.
3. Press 9 for settings.
4. Press 1 for profile status.
5. To select available, press 1. To select away, press 2. To select Out of Office, press
3. For custom profile 1, press 4. For custom profile 2, press 5.
Silent Mode
1. Press and hold the star button to turn on silent mode.
2. Press and hold the star button to turn off silent mode.
Locating a Handset
1. Press the locating button on the base.
2.
All handsets registered to this base station will ring simultaneously and will display the IP
address of the base station on the screen.
3.
Press any key on the handset or press the locating button on the base to end the ringing.
4. You can also locate a handset via paging.
Paging
1. On your handset, press “OK” on the arrow pad.
2. Scroll to Call Features.
3. Scroll down to paging. A list of phones that can be paged will appear.
4. Scroll to your desired phone.
5. Pres “OK” to page your desired phone.
Do Not Disturb
1. On your handset, press “OK” on the arrow pad.
2. Scroll to Call Features.
3. Scroll Down to Do Not Disturb.
4. Press “OK” on the arrow pad.
5. Select the phone you would like to enable Do Not Disturb on, and press “OK”.