Yealink W52P - Getting Started; Packaging Contents; Connecting the Base Station; Setting up the W52 H Handset

Yealink DECT Phone System Deployment Guide
12
The following gives two illustrative cases to assist in explaining how to identify the
quantity and position of the repeaters at prospective customer sites.
Single Repeater Only
In this case, an extended coverage range (30m) is required. You can install a repeater
within the base station coverage area. The separation distance between the base
station and repeater is 30m. The base will hand over calls to the repeaters as the user
moves from the base station coverage area into the extended coverage area. If you
want to extend the coverage range, you can extend the separation distance between
the base station and repeater.
Multiple Repeaters Required
In this case, mobile handset users in the radio coverage cell require extended coverage
areas in different directions.