Yealink W52P Quick Start Up Guide

P a g e | 2 of 2
BASIC OPERATIONS
Turning Handsets On
 Long press until the LCD screen lights up.
 Place the handset in the charger cradle. The handset will be
turned on automatically.
Turning Handsets Off
 Long press to turn the handsets off.
HANDSET SETTINGS
Add a Contact
 Press the OK key to enter the main menu and then select
Directory.
 Enter the desired values in the Name, Number and Mobile
fields.
 Press the Options soft key and then select New Contact.
 Press the Save soft key to accept the change.
Delete a Contact
 Press the OK key to enter the main menu, and then select
Directory.
 Press or to highlight the desired entry.
 Press the Options soft key, and then select Delete to delete
the selected entry.
Assign a Speed Dial Number
 Press the OK key to enter the main menu and then select
Settings -> Telephony -> Speed Dial.
 Press or to highlight the desired speed dial key
and then press the Assign soft key.
 Press or to highlight the desired entry and then
press the OK soft key.
If both the office and mobile numbers are stored, Press
or to highlight the desired number and then press
the OK soft key again.
Volume Adjustment
 Press or during a call to adjust the volume of the
currently used audio device.
 Press or when the handset is idle to adjust the ringer
volume.
BASIC CALL FEATURES
Placing Calls
 Enter the desired number when the handset is idle, and then
press .
Placing Calls from Local Directory
 Press when the handset is idle.
 Press or to highlight the desired entry, and then
press .
If both the office and mobile number are stored, press or
to highlight the desired number, and then press
again.
Placing Calls using the Speed Dial Key
 Long press the Speed Dial key to place a call to the number
assigned to it.
Placing Calls from Call History
 Press the History soft key, and then select the desired Call
History list.
 Press or to highlight the desired entry, and then
press .
Answering Calls
 Press the Accept soft key or press or press .
Ending Calls
 Press .
Call Hold
 Press Options soft key during a call, and then select Hold.
Call Resume
 If there is only a call on hold, press the Resume soft key.
 If there are two calls on hold, press the Resume soft key to
resume the current call, press the Swap soft key to swap
between calls.
Call Transfer – Blind Transfer
 Press the Options soft key during a call, and then select
Transfer.
 Enter the number you want to transfer the call to.
 Press the Transfer soft key.
Call Transfer – Attended Transfer
 Press the Options soft key during a call, and then select
Transfer.
 Enter the number you want to transfer the call to.
 Press to dial out.
 Press the Transfer soft key after the call is answered
Call Forward
 Press OK key to enter the main menu, and then select Call
Features -> Call Forward.
 Press or to highlight the desired line, and then
press the OK soft key.
 Press or to highlight the desired forwarding type
(Always/Busy/No Answer), and then press the OK soft key.
 Select Enabled from the Status field.
 Enter the number you want to forward the incoming calls to in
the Target field.
 Press or to select the desired ring time to wait before
forwarding (only for No Answer forward) in the After Ring
Time field.
 Press the Save soft key to accept the change.
NOTE: For more information about other features, refer to the BizPhone User Reference Guide (contact your Administrator)

Yealink W52P Specifications

General

Caller ID	Yes
Lines quantity	- lines
Answering machine	No
Phonebook capacity	500 entries
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
Maximum indoor range	50 m
Maximum outdoor range	300 m
Voice codecs	G.711, G.723, G.726, iLBC
Number of melodies	9
Display diagonal	1.8 \
Display resolution	128 x 160 pixels
Headset connectivity	2.5 mm
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Standby time	100 h
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	108 mm
Width	153 mm
Height	45 mm
Height (max)	50 mm
Height (min)	144 mm