Yealink W53P Quick Start Guide

2
1. Connect the base station power and the network using method a or
method b.
a. AC Power Option b. PoE (Power Over Ethernet) Option
Note
• If you choose Method a, use Yealink supplied power adapter (5V/600mA).
A third-party power adapter may damage the base station.
• If you choose Method b, you do not need to connect the power adapter.
Make sure the hub/switch is PoE-compliant.
2a. (Desktop Installation) Attach and remove the base stand.
Attach the Base Stand Remove the Base Stand
Align the snap-fits with the corresponding holes
and push forward, snapping them into the holes.
W60B Package Contents
W60B Base Station Base Stand Power Adapter Ethernet Cable Quick Start Guide
Assembling the DECT Phone
IEEE 802.3af compliant
PoE Hub/Switch
Remove the snap-fits from the
holes horizontally.
M
A
C
S
N
M
A
C
S
N
M
A
C
S
N

Yealink W53P Specifications

General

Voice codecs	AMR-WB, G.722, G.726, G.729, OPUS, iLBC
Maximum range	300 m
Firmware upgradeable	Yes
Number of handsets supported (max)	8
Number of parallel conferences	3
Phonebook capacity (per handset)	800 entries
Product color	Black, Silver
Harmonized System (HS) code	85177900
Frequency range (EU)	1880 - 1900 MHz
Frequency range (US)	1920 - 1930 MHz
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Dimensions (WxDxH)	150 x 48.4 x 25 mm