Yealink W56P - Page 16

16
To place a call from the call history:
1. When the handset is idle, press History.
2. Use the up or down navigation buttons to highlight the desired list, and then
press OK.
3. Use the up or down navigation buttons to select a previously dialed number.
4. Press the Call (green phone) button to place the call.
To place an internal call to one handset via another handset:
This feature applies when calls are made to another Yaelink cordless handset
registered to the same base station.
1. Press OK to enter the main menu, and select the Intercom button. Or, press
the up navigation button.
2. The screen will display other registered handset names. Press the up or down
navigation buttons to highlight the handset you want to call. Or select All HS
to dial all handsets.
3. Press the Call (green phone) button, the speakerphone button or OK to place
the call.
To place a new call during an active call via the handset:
1. Press New Call to place the active call on hold.
2. Use the keypad to enter the desired phone number in the Call To field.
3. Press the Call (green phone) button, the Speakerphone button or OK to
place the call.
You can place up to two calls at the same time on your handset.
To redial the last dialed number:
Press the Call (green phone) button twice when the handset is idle. It will dial the
last dialed number.
To redial a previously dialed number:
1. When the handset is idle, press the Call (green phone) button.
2. Use the up or down navigation buttons to select a previously dialed number.
• If the number needs to be edited, select Options and then Edit Before
Call to edit the phone number.
3. Press the Call (green phone) button again.