15
Calls
To place a call:
1. Use the keypad to enter the desired phone number.
2. Press the Call (green phone) button or OK.
To place a call if there are multiple lines assigned to your handset as outgoing lines:
1. Press Line to select the desired line. (If you don’t select a line, the handset will
use the default outgoing line.)
2. Select OK or Dial.
3. Use the keypad to enter the desired phone number.
4. Press the Call (green phone) button or OK.
To place a call from the local directory:
1. Press OK to enter the main menu.
2. Select Contacts.
3. Use the up or down navigation buttons to highlight the contact you
want to call.
4. Press the Call (green phone) button to place the call.
• If the contact has one phone number in your directory, the phone will
dial the number.
• If the contact has multiple numbers stored in your directory, the
screen will display each number. Press the up or down navigation
buttons to locate the desired phone number and highlight it. Press the
Call (green phone) button.
OR
1. When the handset is idle, press the down navigation button.
2. Use the up or down navigation buttons, and highlight the desired phone number.
3. Press the Call (green phone) button to place the call.
• If the contact has one phone number in your directory, the phone will dial
the number.
• If the contact has multiple numbers stored in your directory, the screen
will display each number. Press the up or down navigation buttons to
locate the desired phone number and highlight it. Press the Call (green
phone) button to place the call.
To Next Page
Loading...
