7
To set up the charger cradle and charge the handset:
1. Connect the USB plug on the charger cradle to the
DC5V port on the power adapter.
2. Connect the power adapter into an electrical power
outlet.
3. Place the handset in the charger cradle.
The handset batteries take about three hours to fully charge. After charging,
the handset is ready for use. The batteries’ charging status displays in the top
right corner of the handset’s LCD screen – and will indicate a low battery status.
To restart the handset:
1. Press OK to enter the main menu.
2. Select Settings, System Settings and then Handset Reset.
3. The handset will ask, “Reset handset to default?” Press Yes to reset the
handset or No to cancel.
To Next Page
Loading...
