Yealink W56P - Page 11

11
YEALINK NETWORK TECHNOLOGY CO.,LTD.
www.yealink.com
IP Mode
network.ip_
address_mo
de =
0, 1 or 2
0
Add
It configures the IP address
mode.
0-IPv4
1-IPv6
2-IPv4 & IPv6
mac.cfg
IPv6
network.ipv6
_static_dns_
enable =
0 or 1
0
Add
It triggers the static IPv6
DNS feature to on or off.
0-Off
1-On
If it is set to 0 (Off), the IP
DECT phone will use the
DNS obtained from DHCP.
If it is set to 1 (On), the IP
DECT phone will use
manually configured static
DNS.
Note: It works only if the
value of the parameter
“network.ipv6_internet_por
t.type” is set to 0 (DHCP).
mac.cfg
IPv6
network.ipv6
_prefix =
Integer from
0 to 128
64
Add
It configures the IPv6 prefix.
Note: It works only if the
value of the parameter
“network.ip_address_mode
” is set to 1 (IPv6) or 2 (IPv4
& IPv6), and
"network.ipv6_internet_por
t.type" is set to 1 (Static IP
Address).
mac.cfg
IPv6
network.ipv6
_primary_dn
s =
IPv6 address
Blank
Add
It configures the primary
IPv6 DNS server.
Example:
network.ipv6_primary_dns
= 3036:1:1:c3c7:
c11c:5447:23a6:256
Note: It works only if the
value of the parameter
“network.ip_address_mode
” is set to 1 (IPv6) or 2 (IPv4
& IPv6). In DHCP
mac.cfg