Yealink W56P - Page 35

35
YEALINK NETWORK TECHNOLOGY CO.,LTD.
www.yealink.com
Note: It works only if the
value of the parameter
“features.call_park.park_mo
de” is set to 1.
Broadsoft
_Call Park
features.call_
park.group_p
ark_code
String within
32 characters
Blank
Add
It configures the group call
park code for Gpark soft key
when call park mode is
configured as FAC.
Note: It works only if the
value of the parameter
“features.call_park.park_mo
de” is set to 1.
MAC.cfg
Broadsoft
_Call Park
features.call_
park.park_ret
rieve_code
String within
32 characters
Blank
Add
It configures the park
retrieve code for Retrieve
soft key when call park
mode is configured as FAC.
Note: It works only if the
value of the parameter
“features.call_park.park_mo
de” is set to 1.
MAC.cfg
LED
phone_settin
g.missed_call
_power_led_
flash.enable
0 or 1
0
Add
It enables or disables the
handset power indicator
LED to flash red when the
handset misses a call.
0-Disabled (handset power
indicator LED does not flash)
1-Enabled (handset power
indicator LED slow flashes
(1000ms) red)
common.
cfg
LED
phone_settin
g.common_p
ower_led_en
able
0 or 1
0
Add
It enables or disables the
handset power indicator
LED to be turned on when
the handset is idle.
0-Disabled (handset power
indicator LED is off)
1-Enabled (handset power
indicator LED is solid red)
common.
cfg
LED
phone_settin
g.ring_power
_led_flash_e
nable
0 or 1
1
Add
It enables or disables the
handset power indicator
LED to flash when the
handset receives an
common.
cfg