Yealink W56P - Entering Data and Editing Fields

36
YEALINK NETWORK TECHNOLOGY CO.,LTD.
www.yealink.com
incoming call.
0-Disabled (handset power
indicator LED does not flash)
1-Enabled (handset power
indicator LED fast flashes
(300ms) red)
LED
phone_settin
g.mail_power
_led_flash_e
nable
0 or 1
1
Add
It enables or disables the
handset power indicator
LED to flash when the
handset receives a voice
mail.
0-Disabled (handset power
indicator LED does not flash)
1-Enabled (handset power
indicator LED slow flashes
(1000ms) red)
common.
cfg
Dialplan
dialplan.dialn
ow.rule.X
(X ranges
from 1 to
100)
String within
511
characters
Blank
Add
It configures the dial-now
rule (the string used to
match the numbers entered
by the user).
When entered numbers
match the predefined
dial-now rule, the IP DECT
phone will automatically dial
out the numbers without
pressing the send key.
Example:
dialplan.dialnow.rule.1 =
123
common.
cfg
Dialplan
dialplan.dialn
ow.line_id.X
(X ranges
from 1 to
100)
Integer from
0 to 5
Blank
Add
It configures the desired line
to apply the dial-now rule.
The digit 0 stands for all
lines. If it is left blank, the
dial-now rule will apply to
all lines on the IP DECT
phone.
Example:
dialplan.dialnow.line_id.1 =
1,2
Note: Multiple line IDs are
separated by commas.
common.
cfg