Yealink W56P - Handset Name; Language; Ring Tones

48
YEALINK NETWORK TECHNOLOGY CO.,LTD.
www.yealink.com
1-# key
2-* key
If it is set to 0 (Disabled),
neither “#” key nor “*” key
can be used as the send key.
If it is set to 1 (# key), the
pound key is used as the
send key.
If it is set to 2 (* key), the
asterisk key is used as the
send key.
LED
features.regis
tered_power
_led_flash.en
able
0 or 1
0
Add
It enables or disables the
base power indicator LED to
flash when registering an
account successfully.
0-Disabled (base power
indicator LED does not flash)
1-Enabled (base power
indicator LED slow flashes
(1000ms) red)
common.
cfg
Remote
Phoneboo
k
features.rem
ote_phonebo
ok.enable
0 or 1
0
Add
It enables or disables the IP
DECT phone to perform a
remote phone book search
for an incoming or outgoing
call and display the matched
results on the LCD screen.
0-Disabled
1-Enabled
common.
cfg
Remote
Phoneboo
k
features.rem
ote_phonebo
ok.flash_time
0, Integer
from 3600 to
1296000
21600
Add
It configures how often to
refresh the local cache of
the remote phone book. If it
is set to 3600, the IP DECT
phone will refresh the local
cache of the remote phone
book every 3600 seconds.
Note: If it is set to 0, the IP
DECT phone will refresh the
local cache of the remote
phone book aperiodically.
common.
cfg
LDAP
ldap.call_out
_lookup
0 or 1
1
Add
It enables or disables the IP
DECT phone to perform an
common.
cfg