Yealink W56P - Advisory Tones

49
YEALINK NETWORK TECHNOLOGY CO.,LTD.
www.yealink.com
LDAP search when placing a
call.
0-Disabled
1-Enabled
LDAP
ldap.incomin
g_call_special
_search.enab
le
0 or 1
0
Add
It enables or disables the IP
DECT phone to search the
telephone numbers starting
with ”+” symbol and “00”
from the LDAP server if the
incoming phone number
starts with”+” or “00”. When
completing the LDAP search,
the all search results will be
displayed on the LCD screen.
0-Disabled
1-Enabled
Example:
If the phone receives an
incoming call from the
phone number
0044123456789, it will
search 0044123456789 from
the LDAP sever first, if no
result found, it will search
+44123456789 from the
server again. The phone will
display all the search results.
Note: It works only if the
value of the parameter
“ldap.call_in_lookup” is set
to 1 (Enabled). You may
need to set the value of the
parameter
“ldap.name_filter” to be
(|(cn=%)(sn=%)(telephoneN
umber=%)(mobile=%)) for
searching the telephone
numbers starting with ”+”
symbol.
common.
cfg
LDAP
ldap.tls_mod
e
0, 1 or 2
0
Add
It configures the connection
mode between the LDAP
server and the IP DECT
common.
cfg