Yealink W56P - Backlight; Screen Saver; Wallpaper

50
YEALINK NETWORK TECHNOLOGY CO.,LTD.
www.yealink.com
phone.
0-LDAP—Unencrypted
connection between LDAP
server and the IP DECT
phone (port 389 is used by
default).
1-LDAP TLS Start—TLS/SSL
connection between LDAP
server and the IP DECT
phone (port 389 is used by
default).
2-LDAPs—TLS/SSL
connection between LDAP
server and the IP
DECTphone (port 636 is
used by default).
802.1X
network.802
_1x.root_cert
_url
URL within
511
characters
Blank
Add
It configures the access URL
of the CA certificate.
Example:
network.802_1x.root_cert_
url =
http://192.168.1.10/ca.pem
Note: It works only if the
value of the parameter
“network.802_1x.mode” is
set to 1, 2, 3, 4, 5, 6 or 7.
common.
cfg
Network_
Expired
Time
network.atte
mpt_expired
_time
Integer from
1 to 300
10
Add
It configures the time (in
seconds) to wait after a file
transfer fails before retrying
the transfer for HTTP/HTTPS
connection.
common.
cfg
Network_
Advanced
network.dhc
p.server_mac
1
MAC Address
Blank
Add
It configures the MAC
address 1 that the IP DECT
phones use to authenticate
the DHCP server. If the
authentication is successful,
the DECT phone will use the
IP address offered by this
server.
Example:
network.dhcp.server_mac1=
common.
cfg