Yealink W56P - Page 7

7
YEALINK NETWORK TECHNOLOGY CO.,LTD.
www.yealink.com
1-Enabled
Note: It works only if the
value of the parameter
“voice.rtcp_xr.enable” is set
to 1 (Enabled).
RTCP-XR
phone_setti
ng.vq_rtcpxr.
session_repo
rt.enable =
0 or 1
0
Add
It enables or disables the IP
phone to send a session
quality report to the central
report collector at the end
of each call.
0-Disabled
1-Enabled
common.
cfg
RTCP-XR
phone_setti
ng.vq_rtcpxr.
interval_rep
ort.enable =
0 or 1
0
Add
It enables or disables the IP
phone to send an interval
quality report to the central
report collector periodically
throughout a call.
0-Disabled
1-Enabled
common.
cfg
VQ-RTCPX
R
phone_setti
ng.vq_rtcpxr
_interval_pe
riod =
Integer from
5 to 20
20
Add
It configures the interval (in
seconds) for the IP phone to
send an interval quality
report to the central report
collector periodically
throughout a call.
Note: It works only if the
value of the parameter
“phone_setting.vq_rtcpxr.int
erval_report.enable” is set
to 1 (Enabled).
common.
cfg
VQ-RTCPX
R
phone_setti
ng.vq_rtcpxr
_moslq_thre
shold_warni
ng =
15 to 40
Blank
Add
It configures the threshold
value of listening MOS score
(MOS-LQ) multiplied by 10.
The threshold value of
MOS-LQ causes the phone
to send a warning alert
quality report to the central
report collector.
For example, a configured
value of 35 corresponds to
the MOS score 3.5. When
common.
cfg