Yealink W56P - Page 8

8
YEALINK NETWORK TECHNOLOGY CO.,LTD.
www.yealink.com
the MOS-LQ value
computed by the phone is
less than or equal to 3.5, the
phone will send a warning
alert quality report to the
central report collector.
When the MOS-LQ value
computed by the phone is
greater than 3.5, the phone
will not send a warning alert
quality report to the central
report collector.
If it is set to blank, warning
alerts are not generated due
to MOS-LQ.
VQ-RTCPX
R
phone_setti
ng.vq_rtcpxr
_moslq_thre
shold_critica
l =
15 to 40
Blank
Add
It configures the threshold
value of listening MOS score
(MOS-LQ) multiplied by 10.
The threshold value of
MOS-LQ causes the phone
to send a critical alert
quality report to the central
report collector.
For example, a configured
value of 28 corresponds to
the MOS score 2.8. When
the MOS-LQ value
computed by the phone is
less than or equal to 2.8, the
phone will send a critical
alert quality report to the
central report collector.
When the MOS-LQ value
computed by the phone is
greater than 2.8, the phone
will not send a critical alert
quality report to the central
report collector.
If it is set to blank, critical
alerts are not generated due
to MOS-LQ.
common.
cfg
VQ-RTCPX
R
phone_setti
ng.vq_rtcpxr
10 to 2000
Blank
Add
It configures the threshold
value of one way delay (in
common.
cfg