EasyManuals Logo

Yealink W60P Manual

Yealink W60P
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
4
Charge the handset
+ After setting up the handset and charger, place the handset in the charger.
+ The handset battery takes about 3 hours to fully charge. The charging status is displayed on the top right hand corner
of the LCD screen.
Attach the Belt Clip
+ Push the clip onto the back of the handset.
+ Insert the clip into the designated notches in the handset.
After the base station starts up successfully and the handset is registered to the base station, all LEDs on the base station
will illuminate green in sequence.
1. Paging Key - Locates a misplaced handset.
Toggles the registration mode.
Resets the base station to factory settings.
2. Registration LED - Indicates the mode of the base station.
+ Fast flashing green - paging mode.
+ Slow flashing green - registration mode.
+ Solid green - there is at least one handset registered to the base.
+ Off - the base is powered off or no handsets are registered to base.
3. Network Status LED - Indicates the network status.
+ Slow flashing green - network is unavailable.
+ Solid green - network is available.
+ Off - base is powered off.
4. Power Indicator LED - Indicates the power status of the base station.
+ Slow flashing green - base is going through a firmware upgrade.
+ Solid green - base is powered on.
+ Off - base is powered off.
W60P BASE STATION FEATURES
Need support? Connect with us at www.northland.net/support or
Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Training Representative

Other manuals for Yealink W60P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink W60P and is the answer not in the manual?

Yealink W60P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWireless handset
Product typeIP Phone
Product colorBlack, Silver
Wall mountableYes
Standby time400 h
AC adapter input voltage100 - 240 V
Battery technologyLithium
Headset connectivity3.5 mm
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports1
Maximum indoor range50 m
Maximum outdoor range300 m
Lines quantity- lines
Phonebook capacity500 entries
Number of handles included1 pc(s)
Display diagonal2.4 \
Display resolution240 x 320 pixels
Voice codecsAMR-WB, G.722, OPUS
Number of melodies9
Security algorithmsSRTP, SSL/TLS
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Volume controlDigital
Keypad number of keys12
Number of function keys6
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Weight7500 g
Package depth95 mm
Package width196 mm
Package height205 mm
Package weight8300 g
Base dimensions100 x 25.1 x 130 mm
Handset dimensions (WxDxH)53 x 20.3 x 175 mm

Related product manuals