Yealink W53P & W60P User Guide
36
Setting the Ring Tone for the Internal Calls
Procedure
1. Navigate to OK->Settings->Audio->Ring Tones->Melodies.
2. Select a desired ring tone from the Intercom Call field.
The ring tone is played automatically.
3. Press Save.
Setting the Ring Tone for the External Calls
Procedure
1. Navigate to OK->Settings->Audio->Ring Tones->Melodies.
2. Select the desired ring tone for a specific line.
The ring tone is played automatically.
3. Press Save.
Setting the Advisory Tone
Advisory tones are acoustic signals of your handset, which inform you of different actions and states. You can con-
figure the following advisory tones independently:
l Keypad Tone: plays when you press any key on the keypad.
l Confirmation: plays when a setting is changed or the handset is placed in the charger.
l Low Battery: plays when the battery capacity is low and the handset needs to be charged.
Note
If the silent mode is activated, the advisory tones will not play, but you can still see the low battery and confirmation alert
on the phone screen.
Procedure
1. Navigate to OK->Settings->Audio->Advisory Tones.
2. Select the desired value from the Keypad Tone field.
3. Select the desired value from the Confirmation field.
4. Select the desired value from the Low Battery field.
5. Press Save.