Yealink W80B - Wall Mount Installation

E
N
G
L
I
S
H
1
1. Connect the power and the network using method a or method b.
a. AC Power Option b. PoE (Power over Ethernet) Option
Note: If you choose method a, use Yealink supplied power adapter (5V/1.2A).
A third-party power adapter may damage the base station.
If you choose method b, you do not need to connect the power adapter.
Make sure the hub/switch is PoE-compliant.
Packaging Contents
IEEE 802.3af compliant
PoE Hub/Switch
2. Mount W80B on the wall or on the ceiling.
W80B Base Station
Expansion Screws
Quick Start Guide
Package Contents
Installation
Power Adapter
(Optional)
+
+
2
2
MAC
SN
59mm
59mm
MAC
SN
Wall-Mount Installation
A
30 mm
25 mm
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
Max:4.5mm
(0.177”)
Max:3mm
(0.118”)