Yeastar Technology NeoGate TA400 - Packet Tool; System

NeoGate TA400/800 User Manual
10/62
Options
·Enable Hardware Log
Save the information of hardware; (up to 4 log files)
·Enable Normal Log
Save the prompt information; (up to 16 log files)
·Enable Web Log
Save the history of web operations (up to 2 log files)
·Enable Debug Log
Save debug information (up to 2 log files)
2.2.3 Packet Tool
This feature is used to capture packets for technician. Integrate packet capture
tool “Wireshark” in NeoGate.
Users also could specify the destination IP address and port to get the packets.
·IP
Specify the destination IP address to get the packets.
·Port
Specify the destination Port to get the packets.
3. System
Click to access. In this page, we can configure the network settings,
security settings and some system preferences.