NeoGate TA400/800 User Manual
11/62
3.1 Network Preferences
3.1.1 LAN Settings
Figure 3-1 Static IP Address Mode
Table 3-1 Description of LAN Settings
Hostname
Set the host name for NeoGate TA
Static IP Address Set the NeoGate TA’s IP address as a static IP
IP Address
Set the IP Address for NeoGate TA. It is recommended that
you configure a static IP address for NeoGate TA.
Subnet Mask Set the subnet mask for NeoGate TA
Gateway Set the gateway for NeoGate TA
Set the primary DNS for NeoGate TA.
Set the secondary DNS for NeoGate TA
Set the second IP Address for NeoGate TA
Set the second subnet mask for NeoGate TA
Figure 3-2 DHCP Mode
Select DHCP mode to get network automatically from the local network.
Figure 3-3 PPPoE
Fill in user name and password to access the Internet via PPPoE.
To Next Page
Loading...
Need help?
General
