NeoGate TA400/800 User Manual
16/62
Figure 3-8 Static Route
1) Route Table
The current route rules of NeoGate TA.
2) Static Route Rules
You can add new static route rules here.
Table 3-5 Description of Static Route Settings
The destination network to be accessed to by NeoGate TA.
Specify the destination network portion.
Gateway
Define which gateway NeoGate TA will go through when
accessing the destination network.
Metric
The cost of a route is calculated by using what are called
routing metric. Routing metrics are assigned to routes by
routing protocols to provide measurable statistic which can
be used to judge how useful (how low cost) a route is.
Interface Define which internet port to go through.
3.2 Security Center
3.2.1 Security Center
You can check NeoGate TA security configuration in “Security Center” page. And
also, you can enter the relevant security settings page rapidly.
To Next Page
Loading...
Need help?
General
