NeoGate TA400/800 User Manual
12/62
3.1.2 Service
The administrator can manage all the access methods on NeoGate TA on the
"Service" page.
Figure 3-4 Service Settings
Table 3-2 Description of Service Settings
SSH
By using SSH, you can log in to NeoGate and run commands.
It's disabled by default. We don't recommend enabling it if
not needed.
The default port for SSH is 8022;
FTP
The default port is 21.
TFTP
TFTP access;
HTTP
HTTP web access;
HTTPS
HTTPS web access, it is disabled by default, and you can
enable it to get safer web access.
3.1.3 VLAN Settings
A VLAN (Virtual LAN) is a logical local area network (or LAN) that extends
beyond a single traditional LAN to a group of LAN segments, given specific
configurations.
Note:
NeoGate TA is not the VLAN server, a 3-layer switch is still needed, please
configure the VLAN information there first, then input the details in NeoGate TA,
so that the packages via NeoGate TA will be added the VLAN label before
sending to that switch.
To Next Page
Loading...
Need help?
General
