Yo-Yo Desk PRO 2 - Unlock Stroke Limit

14
9. SET UP STROKE LIMIT OF RISING AND LOWERING
9.2 Lock up the lowering stroke
STEP 1:
Press and
or and then release the key. Run the column to your desired height.
STEP 2:
Hold the S key, then hold key 1 for at least 3
second.
The caption “- L -” will display on the screen,
indicating that the current height is locked as
the lowest running height.
STEP 3:
Release the keys The setting is complete.
1. The column cannot run lower than the locking height.
2. Setting the lowest stroke limit will erase the positions lower than the locking height and,
even if the stroke unlocking operation is performed, the memory positions lower than the
locking height cannot be recovered. You must reset the memory position according to the
memory position setting instructions.
3. The locking height will not be unlocked after initialisation.
10. UNLOCK STROKE LIMIT
STEP 1:
Hold the S key then, hold key 2 for a few
seconds.
The caption “- c -” will display on the screen,
indicating that the stroke limits are both
unlocked.
STEP 2:
Release the keys Unlock complete.