YOKOGAWA ADMAG AXG4A User Manual (English)

To Next Page

User’s

Manual

Contents

1. Introduction

1.1 For Safe Use of Product ................................................1

1.2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 Combination for Remote Sensor and

Remote Transmitter ..... .... .... .... .... .... .... .... ..................... .3

2. Receiving and Storage

2.1

Model and Speci cations Check .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. 4

2.2 Storage Precautions ... ... ....... ... .... ... ....... ... ....... ... .... ... ....4

3. Installation

4. Wiring

4.1 Wiring Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4.2 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4.2.5 Recommended Cable for EtherNet/IP

communication ....... .... ....... .... .... ....... .... ....... .... .6

4.3 Cable Entries .................................................................6

4.4 Connecting to External Products of Integral

Flowmeter and Remote Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4.4.1 Wiring Precautions for Power Supply Cables ..6

4.4.2 DC Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4.4.3 Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4.4.4 Connecting to External Products . . . . . . . . . . . . . . . . . . . . . . 7

4.4.5 Wiring Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5. Basic Operating Procedures

5.1 Operation by Display unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

5.2 Display and Basic Con guration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

5.3 Display Mode and Setting Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

5.4 Parameter Setting from Display Panel ....................... 10

5.5 microSD Card Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5.6 BRAIN Con guration Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5.7 HART Con guration Tool . .. . .. . . .. . .. . . .. . . .. . .. . . .. . .. . . .. . .. . . .. . . 10

5.8 Modbus Con guration Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5.9 FOUNDATION  eldbus Con guration Tool . . . . . . . . . . . . . . . . . . . . . . 11

5.10 EtherNet/IP Con guration Tool ... .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. 11

6. Operation

6.1 Pre-operation Zero Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6.2 Zero Adjustment from Display Unit . .. . .. . .. . .. . .. . .. . .. . .. . .. .. 12

6.3 Hardware Switch Setting ............................................ 12

6.3.1 Integral Type and AXG4A Remote

Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6.3.2 AXG1A Remote Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . 13

6.3.3 AXFA11 Remote Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . 13

7. Errors and Countermeasures (Display unit)

ADMAG TI Series

AXG Magnetic Flowmeter

EtherNet/IP Communication Type

Installation Manual

Difference to IM 01E22A01-01EN

IM 01E21A01-03EN-A

1st Edition

Integral Flowmeter

This manual outlines the basic guidelines for installation

and wiring procedures. This manual is applicable only for

EtherNet/IP communication type. For the items which are

not covered in this manual, read the user’s manuals and the

general speci cations as listed in Table 1.1.

Remote Transmitter

Please read the following descriptions in conjunction with IM 01E22A01-01EN.

This document only applies to AXG produced at Yokogawa Corporation of America and sold to North/Central America.

AXG Magnetic Flowmeter

Need help?

Do you have a question about the YOKOGAWA ADMAG AXG4A and is the answer not in the manual?

YOKOGAWA ADMAG AXG4A Specifications

General

Type	Electromagnetic Flowmeter
Model	ADMAG AXG4A
Manufacturer	YOKOGAWA
Repeatability	±0.1% of Rate
Process Connection	Flanged
Output Signal	4 to 20 mA DC with HART (analog)
Communication Protocol	HART
Power Supply	24 V DC
Enclosure Rating	IP67
Ambient Temperature Range	-20 to +60 °C (-4 to +140 °F)
Lining Material Options	PTFE, PFA
Electrode Material Options	SUS316L, Hastelloy C-276, Tantalum, Titanium
Nominal Size	DN 15 to DN 600 (1/2" to 24")