YOKOGAWA TY710 - Page 45

100
<To delete of saving data>
Delete method (SAVE-mode)
• Todeletealldata
1) Press the MEMORY key.
(The display shows the “ MEM ”symbol.)
2) Hold down the SAVE (HOLD) key for one second.
(The display shows the “ CLr ? ”symbol.)
3)PresstheSAVE(HOLD)key.
All data is deleted.
• Tooverwriteselecteddata
1) Press the MEMORY key.
(The display shows the “ MEM ”symbol.)
2) Press the SAVE (HOLD) key.
(The sub-display shows the number of saved data.)
3)Usethe

(RANGE) key or

(REL
/%) key to select the number of saved data.
4) Press the SAVE (HOLD) key to save (over write) the data.
5) To cancel the function, hold down the MEMORY key for one second.
(“MEM” symbol disappears.)
Delete method (LOGGING-mode)
• Todeletealldata
1) Press the MEMORY key.
(The display shows the “ MEM ”symbol.)
2) Hold down the LOG (MIN/MAX) key for one second.
(The display shows the “ CLr ? ”symbol.)
3)PresstheLOG(MIN/MAX)key.
All data is deleted.
MIN/MAX
LOG