YOKOGAWA ZR22G

<10. Other Functions>
10-33
IM 11M12G01-02EN 1sh Edition : Mar. 25, 2021-00
Item Initialization Parameter Default setting
Contact setting
(continuation of the
previous page)
Contact output 3 Contact state during
operation
Closed
Selection of contact
output
Fault OFF
(HH) high-high alarm
event
OFF
(H) high alarm event ON
(L) low alarm event ON
(LL) low-low alarm event OFF
Maintenance OFF
Calibration OFF
Switching output range OFF
Warmup OFF
Cal. gas pressure drop OFF
Upper and lower temp.
alarm
OFF
Upper and lower press.
alarm
OFF
Blowback OFF
Process upset OFF
Calibration correction
alarm
OFF
Calibration stability alarm OFF
With simple cell resist.
meas.
OFF
Simple cell resistance
alarm
OFF
Contact output 4 Contact state during operation 
Selection of contact
output
Fault 
Other settings All OFF
Contact input Contact input 1 Operation of contact
input 1
Operates when
closed
Selection of contact
input 1
Disabled
Contact input 2 Operation of contact
input 2
Operates when
closed
Selection of contact
input 2
Disabled
Others setting Average, maximum/
minimum
Average value calculation time 1 h
Max and min monitoring time 24 h
Unit Temperature setting Temperature unit
selection
°C
Pressure setting Selection of pressure
unit
kPa
Purging time 0min
Measurement log storage cycle 2 s
Password Commissioning Deleted
Execute Deleted
Adjust panel Touch panel Not initialized
Brightness 50%