5.6 Quick switching operation of dual drive mode
Long press and hold the on the main interface of the display, three driving modes can be quickly cycled for
switching,when switching, The left side of the display indicates the current switching status. (When in rear wheel drive, the
stars inside the rear tires always light up, when in front wheel drive, the stars inside the front tires always light up, and when
in full-time dual drive, the stars inside the front and rear tires flash simultaneously)
rear wheel drive front wheel drive full time dual drive
Figure 5-5 Drive mode display interface
5.7 Battery level display
The Battery level is shown as 5 bars. When the battery is full charged, all of the 5 bars lighten up. When the battery is
fully depleted, the bar will begin to flash, warning the user to charge the battery as soon as possible.
Full power Four bars power Three bars power Two bars power One bar power
Figure 5-6 Battery Level Display Interface
5.8 Error code display
If there is a fault occurs in the electronic system of the electric bicycle, the display will automatically show an error
code, see Schedule 1 for a detailed definition of the error code.
Figure 5-7 Error Code Display
When the error code appears on the display, please troubleshoot the problem in time, the electric bicycle will
not be able to drive normally after the problem occurs.
To Next Page
Loading...
